10GBASE-BX60 BiDi SFP+ 1270nm/1330nm 60km Simplex LC SMF Optical Transceiver Module
| Form Type |
SFP+ BIDI |
Max Data Rate |
10G |
| Wavelength |
1270nm/1330nm |
Max Cable Distance* |
60KM |
| Connector |
LC Simplex |
Transmitter Type |
DFB/PIN |
| Protocols |
MSA Compliant |
DDM/DOM |
Supported |
| TX Power |
1~5dBm |
Receiver Sensitivity |
<-15dBm |
Features :
- Up to 60 km transmission on SMF
- Up to 10.3125Gbps
- 1270nm DFB laser and APD receiver
- Electronic Interface compliant with SFF-8431
- 2-wire interface for integrated Digital Diagnostic monitoring
- SFP+ MSA package with single LC connector
- Hot pluggable
- Very low EMI and excellent ESD protection
- +3.3V power supply
- Power consumption less than 1.0W
- Operating case temperature: 0~+70°C
Application:
- High-speed storage area networks
- Computer cluster cross-connect
- Custom high-speed data pipes
Compliance:
- Compliant with IEEE 802.3ae-2002
- Compliant with MSA SFF-8472
- Compliant with MSA SFF-8431
Description:
The YXF-PP-B23L-60D is a high performance, cost effective modules, which is supporting up to 10.3125Gbps, and transmission distance up to 60km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a laser driver and a 1270nm DFB laser. The receiver section consists of a PIN photodiode integrated with a transimpedance preamplifier (TIA) and a Limiting Amplifier. The module is hot pluggable into the 20-pin connector. The high-speed electrical interface is base on low voltage logic, with nominal 100ohms differential impedance and AC coupled in the module.
The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Transmit Fault (Tx_Fault) is provided to indicate that the module transmitter has detected a fault condition related to laser operation or safety. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver. A serial EEPROM in the transceiver allows the user to access transceiver monitoring and configuration data via the 2-wire SFP Management Interface. This interface uses a single address, A0h, with a memory map divided into a lower and upper area. Basic digital diagnostic (DD) data is held in the lower area while specific data is held in a series of tables in the high memory area.
World wide used our SFPs:
Our Advantages:
Packing and Shipping:
We support DHL/FedEx/UPS and other delivery methods
Q&A
Q: What kinds of custom choices are offered in YXFiber?
A: As for customized transceivers, YXFiber offers regular custom choices such as compatibility, transmission distance, operating temperature, label pattern, label colors and etc. What's more, YXFiber welcomes any inquiry for customized products and solutions for all need and specifications.
Q: Why should I trust YXFiber compatible transceivers?
A: Besides the price advantage, we have compared to branded transceivers, YXFiber compatible transceivers also maintain the same performance and reliability. To satisfy our customers' needs of high performance, all of our transceivers are tested multiple times in mainstream original brand switches in our test center before shipped out.
Q: Can we use APC connectors on this?
A: Hi, as the default type is UPC, so it's only can be connected with UPC connectors. Thanks
Q: Once I place an order for my transceivers, how long will it take to receive them?
A: Normally you can receive the goods within 7 workdays
Q: Will using compatible optics in my equipment negatively affect my manufacturer's warranty?
A: No. Network equipment manufacturers do not require that you use only name-brand optics. In fact, when a product fault or defect occurs in the network, and the fault or defect is not attributable to the use of third-party optics, they will continue to provide support for the affected product under warranty or covered by their support program.
Audited Supplier 
){kind=link}